PC/ABS, a blend of polycarbonate (PC) and acrylonitrile-butadiene-styrene (ABS), is a thermoplastic material that combines the excellent characteristics of both components. It offers the moldability of ABS and the mechanical strength, impact resistance, heat resistance, and UV resistance of PC. PC/ABS is widely used in automotive interior parts, office equipment, communication devices, household appliances, and lighting equipment.
see details
Polyethylene is the most produced and widely used general-purpose thermoplastic, with a simple molecular structure mainly consisting of repeating methylene chains. PE is a typical crystalline polymer, and depending on the polymerization process and chain structure, it is mainly divided into high-density polyethylene (HDPE), low-density polyethylene (LDPE), and linear low-density polyethylene (LLDPE). HDPE has few branches, regular structure, and high crystallinity; LDPE has many branches, loose structure, and low crystallinity; LLDPE has a linear structure with short branches and properties between the two. Common characteristics of PE include excellent chemical stability, very low moisture absorption, good electrical insulation, and flexibility, but its low surface energy makes printing and bonding difficult, and it has poor heat resistance.
see details
What do you think? Is experience more important than science in injection molding? Please share your comments.
see details
Movable Mould Moving Half; Fixed Clamp Plate Top Clamping Plate Top Plate; Moving Clamp Plate Bottom Clamping Plate Bottom Plate
see details
Advantages of Gas assist Molding 1.Cycle time reduction and lower production costs 2.Lower clamp tonnage 3.Lower Injection pressures 4.Faster cycle due to hollow sections vs. solid section
see details
86-769-87323588
